NZXT H210i Mini-ITX RGB Gaming Case – Black/Red Tempered Glass

The NZXT H210i is the successor of the H200i Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized and now requires only one screw at the rear of the case This gives a cleaner look and the glass is under less total tension In addition NZXT has installed a Smart Device V2 to control fans and RGB LED accessories and has also refreshed the front panel with new connectivity options THE FEATURES OF THE NZXT H210I-MINI-ITX PACKAGE AT A GLANCEMini-ITX package from NZXT in blackredIntegrated controller for fan and RGB-LEDsTwo Aer F120 fans pre-installedLarge side window made of tempered glassIncludes addressable NZXT HUE 2 RGB-LED stripPlace for one 240 and one 120 radiatorSlots for up to three 25-inch drives and one 35-inch driveNZXT H210I MINI-ITX CASE WITH TEMPERED GLASSNZXT has opted for the tried and tested shape of the H210i's predecesssor with smooth outer surfaces and attractive proportions Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four knurled screws On the NZXT H210i on the other hand the side surface is completely flat A single thumbscrew on the back of the case provides a secure grip and easier access to the inside of the computer As a special feature the NZXT H210i mini tower has an integrated controller with NZXT CAM support called the Smart Device V2 It is used to control the pre-installed NXZT Aer F fans and the NXZT HUE 2 RGB-LED strips included with the case which are visible through the tempered glass window A total of nine fans can be connected to the three PWM connectors via Y-cables The RGB connectors together support four HUE 2 strips or up to five NZXT Aer RGB fans An acoustic sensor helps to determine the optimum balance between cooling and noise The system is controlled via the feature-rich software on the PC AIR AND WATER COOLING OPTIONSIf you rely on traditional air cooling the NZXT H210i offers a lot despite its compact dimensions At the front there is room for two 140 or 120 fans and in the roof as well as in the back wall there is room for one 120 mm fan each For CPU coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower as standard with in-house fans from the Aer series A black 120 model is pre-installed in the cover and on the back The fans ensure a plentiful supply of fresh air Removable dust filters are mounted on the front and under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 mm radiator In addition a 120 heat exchanger can be installed on the rear wall In the front 85 millimetres of space are provided along with 42 millimetres on the rear wall On the cable cover between motherboard and the front of the case a reservoir and pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWARE COMPONENTSThe interior of the NZXT H210i is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters long Like its predecessors the NZXT H210i has no external drive bays Internally however a quite large number of storage drives can be installed Under the power supply cover a 35 inch hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive should you prefer Behind the motherboard tray there is space for two 25-inch drives mounted vertically and another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch hard disk Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available for discretely stowing away unsightly cables Technical DetailsDimensions without feet 210 x 334 x 372 mm (W x H x D)Dimensions with feet 210 x 349 x 372 mm (W x H x D)Material steel tempered glassWeight 6 kgColour Black (outer panels chassis) Red (cable cover trim)Form factor Mini-ITXFans possible in total2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)Pre-installed1x 120 mm Aer F120 (1200 RPM 8566 m&179;h 28 dB(A) Rear)1x 120 mm Aer F120 (1200 RPM 8566 m&179;h 28 dB(A) Roof)Filter Front bottomRadiator Mountings1x 240 mm (front)1x 120 mm (rear)Drive Bays1x 35 25 (internal)3x 25 (internal)PSU 1x Standard ATX SFX (optional)Expansion slots 2IO Panel1x USB 30 Type A (USB 31 Gen 1 internal connection)1x USB 31 Type C (USB 31 Gen 2 internal connection)1x 35 mm jack (4-pin TRRS Audio InOut)Smart Device V2Connections3x 4-pin PWM (max 10W per channel)2x 4-pin RGB (NZXT HUE 2 proprietary)1x USB 20 (9-pin internal)1x SATA currentMaximum CPU cooler height 165 mmMaximum length of the graphics card 325 mmMaximum power supply length 311 mmMaximum radiator depthFront 85 mmRear 42 mmAccessories1x NZXT H210i1x Set mounting screws10x Cable ties1x Headset adapter (1x 35 mm 4-pole to 2x 35 mm 3-pin)Manufacturer warranty 2 years... More