Renkforce RF-3395608 Network extender Two-wire Range (max.): 500 m 1.200 Mbps

With the help of these adapters can also be used in buildings without structured network cabling modern high-speed networks for data communication. The Range Extender uses in the building existing CAT. 6 A or 2-wire telephone lines for data transfer.Maximum Ethernet range and speedIn general, the length of the network cable to 100 meters. For many applications in the network is not enough, this range, such as when installing a remote camera. The compact Renkforce Gigabit network extension made from aluminum offers the optimal solution by using the Ethernet signal with a speed of up to 1200 MBit/s via a range of up to 500 meters seamlessly.Power supply via PoEPower supply on one side is enough. The converter control PoE (IEEE 802.3at/af) and transfer the energy using the 2-wire cable. This provides a converter is the (or) other converter with current. There is even a full-fledged PoE Lan-Port. I.e. IP cameras could also be supplied with energy.Easy to set upTo use simply connect the transmitter via the supplied power unit with the power and connect via a RJ45 cable to a network. Now this via a UTP cable with the receiver and connect the desired device via an additional RJ45 cable is also on the receiver. And it is the network extension ready for use, whereby the three built-in LEDs in addition the status of the installation screens. This also gives a simple plug-and-play solution, because no network or IP address no direction is necessary.High compatibilityTo the extent that they want to connect other devices to the network extension, you retain the re-purchase a complete system saves. By a UTP 1:2 splitter, you can simply add other receiver to the existing network and current signal connect, which in addition to the cost a lot of effort saves. The transmitter or receiver is equipped with all the CAT5, CAT5e, CAT6, CAT 6e and CAT 7 network cables as well as 2-wire cables with RJ45 plug compatible.This text is machine translated.... More