Zalman X3 ARGB Mid-Tower Case – Black Tempered Glass

Zalman's X3 Mid-Towwer focuses on an appealing design with digitally addressable RGB lighting The cooling properties of the case are not compromised as numerous fans and large CPU coolers are supported The lighting of the four included case fans can be controlled using buttons on the front panel or through a compatible motherboardTHE FEATURES OF THE ZALMAN X3 MID-TOWER AT A GLANCEStylish Mid-Tower in BlackSlightly tinted tempered glass (20 percent)Front and side panels can be removed without toolsFour supplied ARGB fansSuitable for up to six case fansIncluding ARGB controller for up to six fans and two RGB stripsSupports GPUs up to 350mm longTHE ZALMAN X3 IN DETAILThe Zalman X3 is designed for air cooling due to its compact dimensions but can also be equipped with full water cooling Three 120mm fans with digitally addressable RGB lighting are pre-installed at the factory Another fan of the same type is located in the rear of the chassisTwo 120 or 140mm fans can be attached to the top Alternatively a 140mm fan can be attached to the rear chassis and two 140mm fans instead of the three 120mm fans on the front panel This allows a total of six 120mm or five 140mm fans to be installed into the X3 The Zalman X3 can accommodate 175mm high CPU coolersThe integrated RGB controller enables the connection of up to six fans including a 3-pin RGB signal cable (5V) and the two RGB strips integrated in the cover A dedicated button on the front panel allows you to control the lighting effects Alternatively the controller can be connected to the 3-pin header of a compatible mainboard in order to control the digitally addressable RGB accessories via softwareZALMAN X3 A HOME FOR POWERFUL HARDWARE COMPONENTSThe white motherboard tray of the Zalman X3 can accommodate small mini-ITX micro-ATX and regular ATX motherboards Graphics cards can be up to 350mm long A total of seven horizontal expansion slots are available There is space for an ATX power supply with a maximum length of 180mm under the power supply cover The Zalman X3 offers a factory installed drive cage for a 35-inch and a 35 25-inch drive and two 25-inch drive carriers that can fit on the power supply coverTHE DESIGN OF THE ZALMAN X3The wide ventilation slot in the front of the chassis is immediately noticeable It gives the Zalman X3 a classy-looking appearance and enables the ARGB fans behind the mesh with their luminous rings to pull air into the case with ease The left side panel is a large side window made of tempered glassThis allows for a great view of the installed hardware and has been given a 20 percent tint The case is completely black with the motherboard tray and power supply cover in white setting a contrasting accent The power supply and its connection cables are skillfully hidden by the coverEXTENSIVE VARIETY OF CONNECTIONSThe I O panel of the Zalman X3 is equipped with two USB 30 and two USB 20 ports In addition there are two 35 mm jacks one of which functions as a headphone output and the other as a microphone input In addition to the power and reset buttons there is also a button for controlling the RGB lightingSPECIFICATIONDimensions 210 x 459 x 430 mm (W x H x D)Material Steel Plastic Tempered GlassWeight 91kgColour BlackForm Factor ATX Micro-ATX Mini-ITXTotal Fans Possible3x 120 2x 140mm (front)2x 120 2x 140mm (top)1x 120 1x 140mm (back)Total Radiators Possible1x 360 280mm (front)1x 120mm (rear)drive bays1x 35 25 inch (internal HDD cage)1x 25 inch (internal HDD cage)2x 25 inch (internal single carrier)Power supply 1x standard ATX (optional)Expansion slots 7I O panel2x USB 302x USB 202x 35 mm jack (audio in out)Maximum CPU cooler height 175mmMaximum graphics card length 350mmMaximum power supply length 180mm... More